Having trouble getting Original Toto Flapper THU092-7, really, seal gasket alone would be fine

Users who are viewing this thread

sam001

New Member
Messages
5
Reaction score
1
Points
3
Location
Ontario
I recently got a 2 month water bill with exactly 100,000 liters above the norm for the winter months.
I suspect a meter roll of an extra digit which I found is quite possible.
Next billing as per my daily meter check should be back to normal. These spikes are hard to figure,
so the meter was changed, but I still must pay the $500+ water bill.
No leaks were found anywhere. Toilets were checked and double checked with food dye.
I have 4 Toto toilets CST743SD (6 years old) for which as a future preventative I want to replace the
flappers. I ordered 2 months ago and still out of stock.
Toto tells me this fancy flapper has been replaced by a basic looking THU331-S.
Toto says they still have the THU092-7 but they have it on back order as I already know.

I wish that at least I could get the grey rubber seal gasket which is removable.
This seal is about 3" in Dia with a 1" +- hole (like a donut)
Any suggestions, or part number for this seal, ??


toto_flapper_old.jpg




Thank you gentlemen for your assistance,

Sam Greater Toronto Area
 
Last edited by a moderator:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks