had my cast iron changed to pvc, does it look correct?

Discussion in 'Plumbing Forum, Professional & DIY Advice, Tips & ' started by iananderson82, Sep 9, 2013.

  1. iananderson82

    iananderson82 New Member

    Messages:
    5
    Location:
    Cleveland
    Hi all I recently bought a house and I'm remodeling the bathroom. I had an iffy guy come over to do the waste drain vent and it looks a little different than it was but I'm wondering if it looks correct. Any help is appreciated, thanks.

    [​IMG]

    [​IMG]
  2. Terry

    Terry Administrator Staff Member

    Messages:
    14,763
    Location:
    Bothell, Washington
    Without seeing what else is connected, it looks good.

    The 3" stack near the tub should be vent only. If there isn't a bathroom above that, you're golden. :)

    A lav waste can be 1.5"
    A kitchen sink waste should be 2", with 1.5" trap arm and vent.
  3. iananderson82

    iananderson82 New Member

    Messages:
    5
    Location:
    Cleveland
    Thank you, Terry.
Similar Threads: cast iron
Forum Title Date
Plumbing Forum, Professional & DIY Advice, Tips & PVC transition to Cast Iron May 31, 2014
Plumbing Forum, Professional & DIY Advice, Tips & inserting 3" PVC in old 3.5" cast iron as a liner!! May 30, 2014
Plumbing Forum, Professional & DIY Advice, Tips & Porous spot on cast iron sewer pipe. May 9, 2014
Plumbing Forum, Professional & DIY Advice, Tips & New Kohler Cast Iron Tub and Gerber Bath Tub Drain Reuseable? Apr 22, 2014
Plumbing Forum, Professional & DIY Advice, Tips & Reduce 4" cast iron to 3" pvc? Apr 8, 2014

Share This Page