Good source for plumbing parts?

Discussion in 'Plumbing Forum, Professional & DIY Advice, Tips & ' started by Vitaliy, Sep 11, 2005.

  1. Vitaliy

    Vitaliy New Member

    Messages:
    73
    Location:
    Massachusetts
    Hi,

    Could someone point me to the good source for plumbing parts on
    the Internet?
    I spent couple hours sourcing Internet and finally gave up.
    Well, I can find everything but not what I was looking for.
    In particular, I need 3/4“ Meter Union (with rubber washer)
    and Solder Union for the N35B Watts Pressure Regulator
    (this union has rubber o-ring). My local Home Depot (Newton, Ma)
    does not have anything sutable at all.

    Thank you,

    - Vitaliy
  2. hj

    hj Moderator & Master Plumber Staff Member

    Messages:
    26,519
    Location:
    Cave Creek, Arizona
    parts

    Why don't you go to a good local plumbing supply store and pick them up. they are not Home Depot or Lowes items. If you order them on the Internet you will have to trust that they send the right items and you will have to pay shipping also.
  3. Vitaliy

    Vitaliy New Member

    Messages:
    73
    Location:
    Massachusetts
    Hi HJ,

    Sure, I will go to the local plumbing supply store if I know where one is.
    Could you please point me one around Newton or Chelmsford
    in Massachusetts?

    Thank you,

    - Vitaliy
  4. jimbo

    jimbo Plumber

    Messages:
    8,997
    Location:
    San Diego
    I have a contact back there, and have asked him for a source for you. Will let you know. ( I grew up in Newbury; both my parents' families were from Waltham, and my aunt lived most of her life in Newton.)
  5. Gary Swart

    Gary Swart In the Trades

    Messages:
    7,334
    Location:
    Yakima WA
    Have you looked in the Yellow Pages? Plumbing supply houses should not be too difficult to locate.
  6. teamo

    teamo New Member

    Messages:
    95
    Location:
    Massachusetts
    There is a good one in Watertown right near the Arsenal Mall. I cannot recall the name of it but it should be in the phone book.
  7. plumguy

    plumguy New Member

    Messages:
    192
    Location:
    MA
    In Newton there is J.D. Daddario/Ferguson Co. it is right on rte 9.
  8. plumber1

    plumber1 Plumber

    Messages:
    1,423
    Location:
    Florida
    parts

    Try Google...
  9. jimbo

    jimbo Plumber

    Messages:
    8,997
    Location:
    San Diego
    Try in the phone book for Republic Pipe and Supply; and also try Capco Energy in Chelmsford.
  10. Vitaliy

    Vitaliy New Member

    Messages:
    73
    Location:
    Massachusetts
    Thank you all for very good and useful info.

    - Vitaliy
  11. macska

    macska New Member

    Messages:
    32
    There's a plumbing supply house in Jamaica Plain on Washington St., but I just can't seem to remember the name. You can't miss it if you drive by it.
Similar Threads: source plumbing
Forum Title Date
Plumbing Forum, Professional & DIY Advice, Tips & Source for Crane Plumbing? Sep 17, 2008
Plumbing Forum, Professional & DIY Advice, Tips & Hot water heater as a water source for ice maker? May 7, 2014
Plumbing Forum, Professional & DIY Advice, Tips & Can i service stem which appears to be source of leak in watts ball valve? Feb 22, 2014
Plumbing Forum, Professional & DIY Advice, Tips & Trying to find source of sewer gas smell Feb 27, 2013
Plumbing Forum, Professional & DIY Advice, Tips & aquasource 0309693 Feb 4, 2012

Share This Page