Researching a Fleck valve based softener, and checking specifications on 2510 versus the 5800. We have a 1" well water service.
Reading the forum, lots of posts about the 5600, with some notes it's an old valve, but that the 5800 is a replacement, newer and solid. One of the dealer options offers this. Another is a 2510-based unit.
I did a bit of research, and noted the 5800 is a 3/4' internal, but has better flow rates (Cont/Peak/CV: 21/27/5.4) than the 2510 (19/24/4.8). I also found the 1" 5810 valve is no more. 2510 is 1" inlet.
Any opinions on valve type?
Reading the forum, lots of posts about the 5600, with some notes it's an old valve, but that the 5800 is a replacement, newer and solid. One of the dealer options offers this. Another is a 2510-based unit.
I did a bit of research, and noted the 5800 is a 3/4' internal, but has better flow rates (Cont/Peak/CV: 21/27/5.4) than the 2510 (19/24/4.8). I also found the 1" 5810 valve is no more. 2510 is 1" inlet.
Any opinions on valve type?