Fernco Ty-Seal Part No?

Discussion in 'Plumbing Forum, Professional & DIY Advice' started by Lakee911, Oct 15, 2005.

  1. Lakee911

    Lakee911 I&C Engineer (mostly WWTP)

    Joined:
    Aug 23, 2005
    Occupation:
    I&C Engineer (mostly WWTP)
    Location:
    Columbus, OH
    What's Fernco's part number for the widget to join 4" PVC to a 4" Cast Iron Bell?

    Thx
    Jason
     
  2. Gary Swart

    Gary Swart In the Trades

    Joined:
    Sep 1, 2004
    Location:
    Yakima WA
    I don't know the part number, but they are all marked as to what combination of pipes they fit, so you really don't have to have a number.
     
  3. Sponsor

    Sponsor Paid Advertisement

     
  4. Lakee911

    Lakee911 I&C Engineer (mostly WWTP)

    Joined:
    Aug 23, 2005
    Occupation:
    I&C Engineer (mostly WWTP)
    Location:
    Columbus, OH
    Ya, but I couldn't find it on their website.

    Thx,
    Jason
     
  5. hj

    hj Moderator & Master Plumber Staff Member

    Joined:
    Aug 31, 2004
    Occupation:
    Plumber
    Location:
    Cave Creek, Arizona
    tyseal

    One reason you did not find it is that they only make connectors for plain end to plain end pipes. For the hub insert you have to go to the Tyler Pipe site.
     
  6. jimbo

    jimbo Plumber

    Joined:
    Aug 31, 2004
    Location:
    San Diego
    If you are looking for a donut seal for the bell, you need to measure the ID of the bell and take that measurement to the plumbing supply. I don't see a Fernco that goes over the bell. Try the other supplier mentioned by hj.
     
  7. srdenny

    srdenny Plumbing Contractor

    Joined:
    Sep 11, 2004
    Occupation:
    Plumbing Contractor
    Location:
    SF Peninsula
  8. Lakee911

    Lakee911 I&C Engineer (mostly WWTP)

    Joined:
    Aug 23, 2005
    Occupation:
    I&C Engineer (mostly WWTP)
    Location:
    Columbus, OH
    Thanks for the info everyone.

    Jason
     
  9. dubldare

    dubldare Plumber/Gasfitter

    Joined:
    Sep 14, 2005
    Occupation:
    Plumber/Gasfitter
    Location:
    MN/ND
    Last edited by a moderator: Oct 18, 2005
Similar Threads: Fernco Ty-Seal
Forum Title Date
Plumbing Forum, Professional & DIY Advice Tips of the Trade - prepping old Cast for Fernco? Yesterday at 4:20 AM
Plumbing Forum, Professional & DIY Advice Connecting PVC to Cast Iron. Fernco likely will not fit... :( Jan 6, 2015
Plumbing Forum, Professional & DIY Advice Fernco fitting question Dec 21, 2014
Plumbing Forum, Professional & DIY Advice temporary fernco on cast iron leaking Nov 24, 2014
Plumbing Forum, Professional & DIY Advice Fernco to CI leak Sep 21, 2014

Share This Page