Extending Refrigerant Lines

Discussion in 'HVAC Heating & Cooling' started by jeffeverde, Jan 1, 2010.

  1. jeffeverde

    jeffeverde New Member

    Messages:
    79
    Location:
    L.A.
    As part of a remodel, I'm relocating my compressor. Before starting, I had my HVAC guy evacuate and cut/seal the lines. The framing's done and I'm ready to close up the walls, but my HVAC guy's out of town for two weeks.

    Can I put a stick of type L in the wall with 90's stubbing out top and bottom and let my HVAC guy take it from there when he gets back? The existing lineset is 3/4" and 3/8".

    Alternatively, the existing line will reach about half way down the new wall. I could feed it in the wall and plan on opening up that bay when he gets back -- but I'm a little concerned not knowing how much bending the lines will take without risk of kinking/cracking.
Similar Threads: Extending Refrigerant
Forum Title Date
HVAC Heating & Cooling Extending a flexible duct Sunday at 5:15 AM
HVAC Heating & Cooling Considerations for extending cold-air return Aug 2, 2012
HVAC Heating & Cooling Hanging refrigerant/vapor line in crawlspace Oct 23, 2012
HVAC Heating & Cooling AC Refrigerant lines: Braze or Solder? Nov 3, 2009
HVAC Heating & Cooling 410A Refrigerant Charging in Winter vs Summer Sep 16, 2007

Share This Page