DWV Joining to Terracotta Pipe

Discussion in 'Toilet Forum discussions' started by mel_b, Jul 21, 2005.

  1. mel_b

    mel_b New Member

    Messages:
    1
    Could some one please help me as to joining DWV Toilet pipe to terracotta watse pipe. :confused:

    Thanks
  2. hj

    hj Moderator & Master Plumber Staff Member

    Messages:
    26,835
    Location:
    Cave Creek, Arizona
    joint

    You have to have a "plain end" piece of pipe, not a bell and then use a Mission, or other brand" coupling with one side sized for "clay" pipe and the other bor the DWV, although you might have to use a bushing in the DWV side if your supplier does not have the proper sized reducing coupling.
  3. toolaholic

    toolaholic General Contractor Carpenter

    Messages:
    874
    Location:
    Marin Co. Ca.
    mel

    we need the pipe material type you are joining to terracotta !

    dwv is the plumbing application, not material type

    chances are it,s either cast iron,pvc, or abs
Similar Threads: Joining Terracotta
Forum Title Date
Toilet Forum discussions Power assist takes water from adjoining toilet May 15, 2007

Share This Page