Drake or Low Profile Toilet?

Discussion in 'Toilet Forum discussions' started by LowLedge, Aug 21, 2007.

  1. LowLedge

    LowLedge New Member

    Messages:
    1
    Location:
    Texas
    Looking at the spec sheet, the Toto Drake is 28.5" tall. Can someone with a Drake tell me how tall the tank is without the tank lid on?

    I want to replace a toilet that's underneath a 30" high counter ledge. The current tank lip is 28.75" high leaving me a 2" gap from the front lip of the tank to the ledge. Not enough room to get my hands in there and replace the leaky fill valve.

    Figure it's time to replace the toilet anyway (old 3.5 gallon) and do my part for the environment. And from what I'm hearing about the Drake, it sounds great and reasonably priced. But I don't want the same problem of the tank being so tall that I can't get my hands in there for repairs if need be.

    And if the Drake just won't work, can someone recommend a good performing low profile toilet that won't break the bank?

    Thanks in advance,
    LowLedge in Austin, TX
  2. Terry

    Terry Administrator Staff Member

    Messages:
    14,994
    Location:
    Bothell, Washington
    The Toto Ultimate is 27.25" high, and the Toto Supreme is even lower.
    Pulling the lid gives more space to work on it.
Similar Threads: Drake Profile
Forum Title Date
Toilet Forum discussions Weak Flushing Drake Today at 7:34 AM
Toilet Forum discussions Drake Transitional HET vs other Drakes? Aug 22, 2014
Toilet Forum discussions Toto Drake fill valve makes strange noises Jul 24, 2014
Toilet Forum discussions 1.28 Toto Drake Back-to-Back Jul 14, 2014
Toilet Forum discussions new eco drake dripping when filling Jun 28, 2014

Share This Page