constant running water after new toilet repair kit installed

Users who are viewing this thread

scrappy

New Member
Messages
21
Reaction score
0
Points
0
Location
New York
the flush lever broke on my AS Cadet toilet, ended up replacing all the tank components with a Korky kit. The problem is that even when the valve fills tank with water and replenishes the bowl, the water continues to run full tilt. We always had a constant trickle of water before (could always see water flowing into bowl), but never will full running water in the tank.

any ideas?
Thanks
Scott
 

scrappy

New Member
Messages
21
Reaction score
0
Points
0
Location
New York
got it! PROBLEM SOLVED. I raised water level and it shut off. Thanks a lot. Thing is i set height according to the instructions, but their measurement is off.

Thanks again for the speedy response!!
Scott
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks