Clack WS1 - two tank GAC setup ?

Users who are viewing this thread

DuckyDucky

New Member
Messages
25
Reaction score
0
Points
1
Location
Ontario
Hi.

My house that I purchase currently has 2 x 12x52 GAC tanks in line, with AutoTrol valve.
One valve died, I'm thiking about replacing them with the Clack.

Can one valve Backwash 2 tanks ? at the same time ? is there any setup possible like this ?

When second tank is being backwashed its using filtered water from 1st tank, I wonder if there is enough gpm supplied, or first tank throttles water ?

Thank you
 

Mialynette2003

In the Trades
Messages
944
Reaction score
17
Points
18
Location
Ocala, Florida
Yes, they make a twin tank Clack valve so it is possible the get one controller to backwash both tanks. Now whether they will both backwash at the same time is a question I can not answer. They may backwash one right after the other.
 

DuckyDucky

New Member
Messages
25
Reaction score
0
Points
1
Location
Ontario
Hi,

Thank you

I been told by dealer to replace my old valves with Clack WS1 TC with DFLC of 8gpm

Is that right setup for 12x52 tank with GAC 12x40 mesh.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks