clack ws1 cs drain leak.

Discussion in 'Water Softener Forum, problems, installation and r' started by tntent805, May 3, 2013.

  1. tntent805

    tntent805 New Member

    Messages:
    25
    Location:
    calif
    Has anyone had problems with the ws1 cs drain assy. Slightly leaking out of the outer retainer clip holes when its draining. Mine is slightly dripping out of the 2 outer holes where the red clip snaps into the holes. Checked the o ring and it looks fine and lubed with silicone.
    Also checked the round white dlfc retainer button housing. It has a flat spot on shoulder, not sure if its designed that way or a defect
    Any suggestions would be appreciated.
    Tks
    Tntent

    Attached Files:

    Last edited: May 3, 2013
  2. ditttohead

    ditttohead Water systems designer, R&D

    Messages:
    1,943
    Location:
    Ontario California
    Replace the o-ring, this is not uncommon.
Similar Threads: clack drain
Forum Title Date
Water Softener Forum, problems, installation and r Clack Drain line constant drip Nov 10, 2012
Water Softener Forum, problems, installation and r 30kgrain softener with Clack WS1 valve losing media out the drain Mar 15, 2011
Water Softener Forum, problems, installation and r Clack WS! settings questions Sep 23, 2014
Water Softener Forum, problems, installation and r Which fitting assemblies for Clack WS1 Jul 13, 2014
Water Softener Forum, problems, installation and r Clack still best, and where to find? Jul 9, 2014

Share This Page