Cadet PRO Elongated Toilet 10" Rough-In 1.6gpf

Discussion in 'Toilet Forum discussions' started by Terry, Nov 29, 2013.

  1. Terry

    Terry Administrator Staff Member

    Messages:
    15,130
    Location:
    Bothell, Washington
    Cadet PRO Elongated Toilet 10" Rough-In 1.6gpf


    [​IMG]


    American Standard Cadet Pro 10" Rough, 215CB.004

    [​IMG]


    [​IMG]

    Fluidmaster fill valve and 3" flush valve.

    [​IMG]

    Elongated bowl with standard height. 15"

    [​IMG]


    American Standard bowl

    [​IMG]

    The Pro Version
    Last edited: Nov 30, 2013
  2. Terry

    Terry Administrator Staff Member

    Messages:
    15,130
    Location:
    Bothell, Washington
    [​IMG]

    Cadet Pro tank

    [​IMG]

    Red rubber tank to bowl gaseket on the left. The tubes on the right are for installing the tank bolts.

    [​IMG]


    [​IMG]


    [​IMG]


    [​IMG]

    Under the bowl rim
    Last edited: Nov 30, 2013
  3. Terry

    Terry Administrator Staff Member

    Messages:
    15,130
    Location:
    Bothell, Washington
    [​IMG]

    Cadet Pro 10" Rough before the seat is installed.

    At 10". there is about 3/4" behind the tank.
  4. wjcandee

    wjcandee Wise One

    Messages:
    1,898
    Location:
    New York, NY
    What's that white male-urination-appendage-looking thing in the flush hole in the bottom of the tank? Looking at your photo underneath the tank. (I tried to say "*****", but you see what happens.)
  5. Terry

    Terry Administrator Staff Member

    Messages:
    15,130
    Location:
    Bothell, Washington
    I have no idea what you are trying to say here :)
    Huh?
  6. wjcandee

    wjcandee Wise One

    Messages:
    1,898
    Location:
    New York, NY
    Ah. Okay, look at the first photo of post #2, which you label as "Cadet Pro Tank". It's a shot from the bottom of the tank looking up. The flush hole has something roundish in it. It is white. It has a maybe 1/4" to 1/2" hole in it. [It is proportional to a schlong -- that was my point.] I'm wondering what that is.

    In thinking about it, I realize that the flapper has likely already been installed and this may be the bottom of the flapper, like a round ball with a hole in it. However, the flapper is red and this is white. Does the PRO have a red flapper with a white plastic insert, or is that something else?
  7. Reach4

    Reach4 Well-Known Member

    Messages:
    2,432
    Location:
    IL
    Rorschach? :)

    What is that big red plastic thing in the next picture down. Is that a wrench to give a better grip on the big white nut under the tank?
  8. Terry

    Terry Administrator Staff Member

    Messages:
    15,130
    Location:
    Bothell, Washington
    The bottom of the tank thingie?
    That is the flapper.
    Many flappers have a hole on the bottom. Maybe all but a few.
    Also many other things may have holes. I'm thinking thata Swiss Cheese has holes, and so can wood with termites have holes in it.
    Also strainers have holes. If I count the holes in my shirt I count four, except if I look at a button down shirt, and then I count 13.

    The red thing, that's the tank to bowl gasket.
    Last edited: Nov 30, 2013
Similar Threads: Cadet Elongated
Forum Title Date
Toilet Forum discussions New American Standard Cadet 3 elongated is 3" off the wall Feb 14, 2010
Toilet Forum discussions Cadet3 elongated toilet, holes from tank to bowl Feb 4, 2009
Toilet Forum discussions Where to buy Cadet 3, Cadet Pro in Toronto area, Ontario? Jun 23, 2014
Toilet Forum discussions Cadet 3 Flowise - Smaller trapway than in previous models? Jun 17, 2014
Toilet Forum discussions Correct tank-to-bowl gasket for American Standard Cadet 2 toilet? Aug 31, 2013

Share This Page