Buderus logomatic 2107 shuts off the baseboard heat when on automatic

Users who are viewing this thread

jamie2727

New Member
Messages
1
Reaction score
0
Points
1
Hi,

I have a buderus boiler that is controlled by the Logomatic 2107. The boiler controls the DHW for 5 apartments. It also sends baseboard water heat to one of the units. (The other 4 units are heated by another boiler by steam.)

When the boiler is in automatic mode, it doesn't pump the base board water. I actually can hear the switch shut it off.

If I adjust the switch to manual mode, it will send the base board water heat and maintain the DHW at whatever temp I set it at. (140).

Any ideas as to why in Automatic mode, it is shutting off the pump to the base board hot water?

Thanks in advance for any help!

jamie
 
Last edited by a moderator:
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks