Best wax ring for Drake 2 = ??

Users who are viewing this thread

Jadnashua

Retired Defense Industry Engineer xxx
Messages
32,770
Reaction score
1,190
Points
113
Location
New England
Expanding on what HJ said, it really depends on where your toilet flange is relative to the finished floor. By design, a toilet flange should be on top of the FINISHED floor, and if it is, pretty much any wax seal you use should work. If it is high or low, you could have issues (high, meaning it is floating in the air, and not properly supported may mean the toilet won't fit at all!; low, you may need a thicker wax ring or to stack a couple). There's one exception - when only using one wax ring, especially on a 3" pipe or an offset flange, do NOT use one with a funnel in it. When pressing it down, that plastic funnel can get squished nearly closed and create all sorts of problems.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks