Bathroom door rough-in

Discussion in 'Remodel Forum & Blog' started by joe59golfer, Jun 28, 2009.

  1. joe59golfer

    joe59golfer New Member

    Joined:
    Jun 28, 2009
    Occupation:
    Marketing and IT administration
    Location:
    Missouri USA
    I'm installing a full bathroom in our basement in an odd space and need to put a door perpendicular to two walls. The space between the two walls is 34" with a triple stud on one side and a double on the other. I'd like to be able to get largest door in the space. I could go with nailing a single cripple stud through the face to the ends of these studs on both sides of the frame and end up with 31" rough opening, but is that sufficient support for an interior door? Thanks for the help.
     
  2. jimbo

    jimbo Plumber

    Joined:
    Aug 31, 2004
    Location:
    San Diego
    A 31" rough will get you a 28" door..... not very big for a bathroom.
     
  3. Sponsor

    Sponsor Paid Advertisement

     
  4. AZ Contractor

    AZ Contractor In the Trades

    Joined:
    Apr 21, 2007
    Location:
    Phoenix, AZ
    Going to have to use a 28" door with narrow trim.
     
  5. hj

    hj Moderator & Master Plumber Staff Member

    Joined:
    Aug 31, 2004
    Occupation:
    Plumber
    Location:
    Cave Creek, Arizona
    door

    28" door, but the hallway will still be 34" so regular 2 1/2", or slimmer,trim would work.
     
Similar Threads: Bathroom door
Forum Title Date
Remodel Forum & Blog Lock for Bathroom Pocket Door Aug 20, 2010
Remodel Forum & Blog Herb's Bathroom Remodel Jun 27, 2015
Remodel Forum & Blog Adding bathroom on second floor - DWV design Feb 8, 2015
Remodel Forum & Blog Bathroom ventilation - multiple fans to one 4" eave vent duct Jan 20, 2015
Remodel Forum & Blog Bathroom vanity replacement Jul 21, 2014

Share This Page