Autotrol valve advice needed

Users who are viewing this thread

verbalkint99

Member
Messages
38
Reaction score
0
Points
6
Location
Waterford, Michigan
So I am looking to get a 2cf Katalox light filter and it is speced with an Autotrol 263/460TC valve. I know these are quality valves, but I ma having a rough time finding info on their limitations. I know that with the Fleck valves the 5600 is limited by is backflow capabilities requiring and upgrade to a 7000 or another valve. Is anyone versed in Autotrol that can tell me if the 263/460 will handle the 2cf of Katalox or if I should have it upgraded. The place I am dealing with works with only Autotrol valves.

Thank you
 

ditttohead

Water systems designer, R&D
Messages
6,088
Reaction score
455
Points
83
Location
Ontario California
The valve can easily be modified for regen later if needed. The valve can backwash 20 GPM, more than adequate for your application.
 
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks