1. raymeyer

    raymeyer New Member

    Messages:
    1
    Location:
    geneva il.
    After everytime my water softner recycles I get air in the line. It"s only on the first floor the second floor doesn"t seem to be affected. It takes quite awhile for the air to clear.
  2. Akpsdvan

    Akpsdvan In the Trades

    Messages:
    1,482
    Location:
    Alaska
    Type of softener and Age of softener please.
  3. Skip Wolverton

    Skip Wolverton In the Trades

    Messages:
    167
    Location:
    Ocala, Fl
    Could be the unit is drawing air during a cycle. Check the brine line carefully.
  4. Akpsdvan

    Akpsdvan In the Trades

    Messages:
    1,482
    Location:
    Alaska
    There was a brine float assembly that was out for awhile, still is but the rubber seal at the base of the float arm would go hard and break, letting air in and way to much water in the brine tank..
    That float was plastic with 1/2" nut on the pickup tube and 3/8" on the brine line.. it is a copy of the Fleck 2310 saftey float..
  5. Bob Fader

    Bob Fader New Member

    Messages:
    1
    Location:
    Willmar,Mn
    air in line

    If this is a Sears, Eco. Linsay. Northstar, or a Morton it is the float under the float! Autotrol valve check the sheck in the glass bowl.
Similar Threads: lines
Forum Title Date
Water Softener Forum, problems, installation and r softener introducting air into my water lines Feb 12, 2010

Share This Page