adjusting square d (9013 fsg-2)

Discussion in 'Shower & Bathtub Forum & Blog' started by rj8214, Jul 17, 2007.

  1. rj8214

    rj8214 New Member

    Messages:
    3
    Hi I'm in need of help. I replaced the pump and had to do some re-configuring of the plumbing. I used the old squared D swith. I set every thing back up. For the most part it works, thank God.

    Here is my problem. The pump senses when its time to fill the tank, but sense when its time to turn the pump off after its full. After reading serveral websites, it seems that I need to measure the PSIs using a gauge. Unfornately the pump that I purchased does not have a gauge for me to determine whether I have enough pressure between the two settings. How do I compensate for this problem?

    Robert
    Last edited: Jul 17, 2007
  2. Gary Swart

    Gary Swart In the Trades

    Messages:
    7,397
    Location:
    Yakima WA
    buy a gauge?
Similar Threads: adjusting square
Forum Title Date
Shower & Bathtub Forum & Blog Adjusting the flow rate of a rain head (Shower Rain Head) Oct 21, 2012
Shower & Bathtub Forum & Blog adjusting the shower head angle Oct 27, 2010
Shower & Bathtub Forum & Blog Adjusting Bath Drain Trip Lever Jun 3, 2007
Shower & Bathtub Forum & Blog Adjusting water temp on a Moen shower Jan 14, 2006
Shower & Bathtub Forum & Blog New tub flange not square Sep 30, 2013

Share This Page