A-Frame heat improvements

Discussion in 'Remodel Forum & Blog' started by dwyerfive@att.net, Dec 29, 2009.

  1. dwyerfive@att.net

    dwyerfive@att.net New Member

    Messages:
    1
    Location:
    CT
    I have an A frame style house with 3 floors including finished basement where oil furnace and domestic hot water produced. 2 zones, 1 for 2nd floor with copper pipe, AL fin baseboard throughout floor where kit.,LR,DR,Bath and 2 bedrooms. 2nd zone is for 3rd floor with 2 bdrms, hallway and bath. Only 2 cast iron radiators on 3rd floor in each bedroom. I would like to take out one cast iron radiator and install in basement still on 2nd zone. The bedroom dim. 18x14x8 would need a baseboard radiator what size? Only glass is full slider.
    Where should cast iron radiator in basement be placed in loop, beginning or end?

    Located in CT

    Appreciate any ideas.
    B
  2. gluecan

    gluecan New Member

    Messages:
    9
    Location:
    Minnesota
    on the end and 2 6 ft go to slatfin.com to learn what you need to know
Similar Threads: A-Frame heat
Forum Title Date
Remodel Forum & Blog Bathroom remodel: underfloor heating and related decisions May 13, 2014
Remodel Forum & Blog In-floor heat under vinyl flooring? Mar 4, 2013
Remodel Forum & Blog Electrical Wiring Capacity / HEAT Mar 21, 2012
Remodel Forum & Blog Subfloor question for tiling a bathroom floor with heat mat under the tiles Sep 2, 2011
Remodel Forum & Blog Decorative imitation fireplace using hot water for heat Sep 24, 2010

Share This Page