11" rough in

Discussion in 'Toilet Forum discussions' started by jimw, Oct 22, 2004.

  1. jimw

    jimw New Member

    Joined:
    Oct 22, 2004
    I would like to install a couple of Toto Drake or Ultramax toilets to eliminate my frequent plunger work on our current low-flows. One of my rough-ins is only 11". The Toto spec sheets show 3/4 inch space between wall and toilet with 12" rough-in. Think I will have a problem using a standard 12" toilet?
     
  2. Terry

    Terry Administrator Staff Member

    Joined:
    Aug 17, 2004
    Occupation:
    Plumber
    Location:
    Bothell, Washington
    Sometimes you can set the bolts out to 11.25" and have it work with the flange.
     
  3. Sponsor

    Sponsor Paid Advertisement

     
Similar Threads: rough
Forum Title Date
Toilet Forum discussions 8.5" rough in... Jun 27, 2016
Toilet Forum discussions found a leak through a hole in the toilet waste pipe Jun 25, 2016
Toilet Forum discussions Any round-bowl Toto toilets w/14" Unifit rough-in? Jun 9, 2016
Toilet Forum discussions Need Advice: 10-inch rough-in for small space Apr 23, 2016
Toilet Forum discussions Replacing a 1929 14" rough toilet Apr 13, 2016

Share This Page