Search results

I would like to tap into this main drain for a laundry room. Where should I tap into ? Would it be a mistake if I connect to the clean out ? I can unscrew the cap "whatever its called" Pics are provided. Thank You

I had to replace the drain portion on my hallway bahrooms. Can you please advise if its fine the way I have it now ? My concern is if water will leak from the drain where the the cast iron pipe connects to the plasic pipe. Here are the pic's Thank You...

When or where is type "M" or "L" of copper used at ? Thank You...

I would like to tap off the water line from the water heater so that I can add an outside garden value for a water hose. The copper pipe from water heater is 3/4 inch. What size should I use to tap off the 3/4 to add the water hose ?

I was wondering if making the standpipe larger the 2" will help eliminate overflow. Maybe 3" of 4 " to hold more water. In what I have read in the paste 2 days it appears that the problem with overflow is that to much water is getting pump into the drain. Any feedback ?

Thanks for the feedback.. I did the changes that were recommended to me in regards to the drainage to our washing machine. It still overflows when the washing machine is draining. At first I can hear the water flow run smooth, then I can hear the standpipe getting filled and then start...

I connected the drain as per pic, it was working just fine, until about 3 weeks ago. How its clogged up. It appears that its just clogs up when the washer machine is running and draining its water. I ran a snake through the pipe and and ran presure water down the drain and the water flow is...

What should be the copper size for an addtion to a house ? Its a restroom the includes a shower/toilet and sink. Thanks in advance. :)