Search results

Looking for and Inspection Camera in 9 to 10 ft range for viewing behind walls, tight spaces, 3 and 4 inch yard drains, Rigid CA 150 vs Milwaukee M12 M-Spector 360

Where can you get 2 inch pipe lock-out valve covers that work with a padlock? Main building water supply is outside in busy area where guy walking by late at night shut water off to all units.

What's the most accurate way to measure for water pressure spikes? Pressure sits at 55 to 60 but will go up and down if pressure gauge is left connected. Is indicator arm pressure gauge like J66302 best tool? https://www.jonesstephens.com/j66302

How is the Wilkins 3/4 70XL #34-70XL water pressure regulator? Should we replace with same model or is their a better quality option?2 Ours is 12 years old it sits at 55 to 58 psi but spikes to 95 to 98.

Item(s) Replacing our cracked corner pedestal sink. Will this handle fit the center hole sink? American Standard 0611.001 Color/Finish: White $202.83 American Standard 0028.000 Color/Finish: White $46.20...

Looking for info on HTP Everlast water heaters. Do they also have expansion tanks? How is parts and technician availability? Want something the average plumber will know how to work on and can easily get parts for. Willing to spend 1.5 to 2x what a Bradford White would cost. Planning to have a...

Looking for a quaility electric water heater with good parts availability. Plumber can get Bradford White and AO Smith or other. Considering the Bradford White 40 gal. Tall 4.5kW 2-Element - RE340T6-1NCWW-506. No easy access to gas or venting for gas. Alsp saw HTP everlast can't tell if it's a...

We've had leaks and burst pipes and the plumber has suggested replacing the Qest polybutylene pipes. PEX would be less expensive less labor and material cost but we prefer the idea of copper. Plumber can do either. For chlorinated and acidic municipal water would type M copper resist corrosion...

I have the common increase in drain noise and air gap noise from my new Bosch 500? Do the Bosch dishwashers use a more powerful pump? Most cycles are supposed to use between 4 and 6 gallons, that's not a lot of water pumped out but it is loud. To reduce noise, would a solid metal-air gap like...

I was able to find a Bosch 500 SHPM65Z52N listed in stock with a delivery date toward the end of the month. Looks like I need a 3/4 to 3/4 elbow connector and a 3/8 supply line? Anything else I need to install this? Looks like Bosch uses 3/4 FHT vs 3/8 FHT. Install manual says a power cord and...

This is a great site I've learned a lot going through forums and had helpful answers to questions. We're replacing our tub drain strainer/ drain body (the part that threads in) and have a few questions. It's a Moen push-n-lock tub drain kit that connects to 1-1/2 in. threaded drains. Does Moen...

Was researching garbage disposal and saw Insinkerator has a pro-line of garbage disposals. Is anyone familiar with these pro models or have experience with them? They're targeted to professionals but can be picked up at plumbing supply stores. Here Ferguson and a few others stock them. Pr0 750...

Replacing a Badger 5 installed by the prior owner with an Insinkerator Evolution Pro 750 with cord. Should we replace the dishwasher drain hose and the air gap too? Not having problems just want to prevent future problems. The dishwasher drains through the air gap to the garbage disposal. We...

Our local utility in San Diego, CA, is offering a $100 rebates for qualified smart leak detectors. Are any of these worth getting? For the external Flume or StreamLab monitor, we'd be about $100 out of pocket and more for the plumbed devices. We have access to our water meter so we can just...

I have a small landscaped area that pools water and has some seepage from the groundwater. The sump pump is the Zoeller 108-0001 craw space kit with the M53 pump, slotted pit, and 1 1/2 inch connections, and I got the Zoeller 30-0181 check valve. They'll be arriving Friday and I want to make...

I have a small u shaped landscaped area around foundation walls that drains poorly. I'm planning to french drain to allow water to run off into the alley when it can run to the storm drain. The commonly available pipes are triple solid wall drainage pipes and the perforated version, schedule 40...

We thought our existing landscape drain was 3-inch hard wall sched 40 pvc and got the sched 40 hardwall pvc pipes and fitting but then realized the existing lines are COEX. We're adding a yard drain upslope of the existing COEX and want to tap into it. Please explain the differences or point me...

Have a small landscaped area with minimal sun exposure that gets damp and seeps into garage through stem wall. Drainage/ foundation company took a look and suggested adding a drain and tapping into existing three inch landscape drain pipe. Too small of a project for them and their minimum fee...

Trying to determine what type of connection this is so I can replace it. These Arrowhead brass are available locally from a pipe supply or I can get something else. Thanks.

My standpipe drain for the washer is about 30 in and it's supposed to be 36 in. Going to install the siphon kit. Is heat pruf grease ok for conbections? And what's the best way to cut corrugated plastic tubing? Appliance shop installer should have put this in but they just installed as is and...