Search results

  1. emcee1111

    Replace Burnham high limit sensor

    The high limit sensor is bad, because even when the boiler has been off for several hours (cooled off), it faults on the open limit upon startup (even before firing up the boiler). Also, the part has been replaced by an electrician before. The SAGE controller also displays the open limit on the...
  2. emcee1111

    Replace Burnham high limit sensor

    The part number is Burnham 101653-01 (High limit sensor). There is definitely a long term issue that I will have a heating specialist check out, but until then I need to get this fix in place.
  3. emcee1111

    Replace Burnham high limit sensor

    I have the installation/operation manual. However, it doesn't detail how to replace the sensor. It just has the part number.
  4. emcee1111

    Replace Burnham high limit sensor

    I have a Burnham Alpine 210 that was installed about 2 years ago. The high limit sensor has had to be replaced a few times now. The last time cost almost $400 due to emergency service. The part is only $35... I have the sensor temporarily jumped out to get my hot water working. Once I get the...
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks