Search results

Thanks guys, Much appreciated

Looks like you have a soldered elbow at the valve body and at your connection to the vertical supply line. Use a jigsaw, or alternative, with a metal cutting blade to cut through both the epoxy and pipe. Remove any valve internals and unsolder the elbows at the valve body and verticle pipe...

I'd appreciate any thoughts or input on the following options under consideration. The source is a private well, relevant water analysis is Calcium 64ppm Iron .05 ppm Manganese 0.28 ppm sulphates 84 ppm hardness as Calcium Carbonate 307 ppm or nominal 18 grains/gallon TDS 578 ppm pH...