Search results

Hi all, Does anyone know the thread specs for Delta 212 ball? I have tried fitting a 8-32 screw and it is very close, but not the same. Is it metric? Thanks.

I have an old Delta single-handle faucet that I want to use for cold water only. There will be no hot water line connected to the faucet. Will the water come out of the hot inlet when the faucet is on? Will the water come out of the hot inlet when the faucet is off? What is the best way to...

Will it work? The threads on the kitchen/bathroom faucet are not tapered. Will Teflon tape seal it? In particular, I was looking to use this PEX to female NPT adapter to hook PEX up to the faucet...

Hi all. I need to run water from a manifold to a kitchen sink faucet using a dedicated 1/2" PEX line. The manifold is within a few feet of the faucet and has a cutoff valve for this line, so I do not see a need for an extra cutoff valve at the faucet. I am thinking of running 1/2" PEX directly...

Is it OK to use a Apollo brand PEX cinch tool (http://www.lowes.com/pd_153553-61002-69PTKG1096_0__?Ntt=69ptkg1096&UserSearch=69ptkg1096&productId=3572372&rpp=32) with SharkBite brand PEX pipe(http://www.homedepot.com/p/SharkBite-1-2-in-x-100-ft-Blue-PEX-Pipe-U860B100/202033010) and...

How can I tell which black poly tubing is for potable water and which isn't? Which rating/certification do I look for? The Home Depot website does not state in plain English if the tubing is for potable water or not. Thanks.

Which will stand up better to big tree roots? Thanks.

Three hundred feet of underground waterline leaks 2 gallons per day. The pipe is 3/4" schedule 40 PVC. Someone else has installed the waterline. Big trees near where the line is. Replace the line or live with it? How likely is it that it will start pouring all of a sudden? Thanks.

Hi all, I have a water leak in an underground waterline running to an older house. The leak is about 100 gallons per day. The line is about 1500 feet long. The water line is 3/4 inch thin wall PVC inside a 1 inch thin wall PVC. Burial depth is about 18-24 inches. So far I have been unable to...