Search results

Sweet Success! Found the Moen cartridge....$58 sucker! Anyway, the original plumber installed the plaster ground behind the fiberglass shower....which did absolutely nothing, so we had to use our trusty Dremmel to cut it out so we could pull the retainer clip out. We were smart enough to put...

Sorry, no advice on your plumbing. But we have had spas since 1992, and got a new Coleman in 2004. This last October, 2005, we had an Eco-Spa salt generation unit installed which is made by Balboa. You can do a web search for info on this. It uses a couple of cups full of ordinary solar salt...

PS: Noticed that there is a temp limit kit that looks like it can be reset up or down to increase or decrease the max temp. Once is a while we run a bit low on hot water...too much laundry close to too many showers...would it work to set that up (counter clockwise) a little to get more hot...

Thanks, Cass, We have a friend who is a prof plumber (but we don't like to "use" friends so didn't want to bother him if we could find out for ourselves how to fix this sucker) who may let us borrow a cartridge puller. We'll now check for a cartridge. Glad we don't have to enlarge the hole...

ID Faucet OK! Took off the handle, and lo-and-behold there was Moen right under the handle where it was invisible before. Went on Moen's website, and, except for the handle having a screw in center with a chrome button to cover it, it looks exactly like the Chateau Posi-temp, L2352. Now, the...

Thanks for your pic suggestions! We will do that tomorrow...stay tuned! Ed & Martha PS: Do you really think Wal-Mart will have parts? ;)

Thanks, Cass, We'll try to get time to do that soon. What we had hoped was to find out some more details before shutting off the water and taking the thing apart. We were concerned that something was really getting bad and taking it apart might make the problem worse if we had to reassemble...

We have home in Central Oregon built in 1994. Tub/shower value in a seldom used bath has been leaking (now dripping pretty fast) from tub spout. Valve has no mfg ID. It has round chrome plate above the tub spout with single control lever that points down when off; H&C are at 9 and 3 o'clock...