Search results

  1. W

    Pressure switch will not turn on

    Yes the water comes out of the pipe.
  2. W

    Pressure switch will not turn on

    Gentlemen: I cured part of my problem by resoldering the start cap back in the circuit board. The problem now is the pressure switch will not cycle. I can manually activate the switch and the relay in the control box turns on and the tank begins to fill. I can turn the water on and run the...
  3. W

    Well electrical systerm

    Gentlemen: Where can I find a typical wiring diagram for a 3/4 or 1 hp pump. The system I have has a breaker box, control box with relay & 2 capacitors and a pressure switch. I have searched forum and can't find one. Thanks Walkingscar
  4. W

    Pump does not turn off

    Gentlemen: It the well site are the various parts and pieces. Fuse box, relay box, tank, valves etc. Pump stopped working. Discovered underground wires from fuse box to relay box had opened. Replaced both wires leaving them above ground. Start capacitor in relay box had worked loose from...
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks