Search results

  1. pool_shark_dc

    Newer furnace electrical problem

    what about the white one from the a/c unit ?? i am assuming the red wire from the a/c goes to the yellow but what about the other ? i'll hook it all up like you say and report back. got to put the bottom end covers together too. so just tape off the gray wire then ? another question i have is...
  2. pool_shark_dc

    Newer furnace electrical problem

    might this help. i have a lux 500 tstat. there are 2 extra wires on there that go to another tstat. i am only wondering if you can help with the ones that go to the furnace
  3. pool_shark_dc

    Newer furnace electrical problem

    got rid of older furnace for a little newer one. must have bumped something cause i got a wire that's not hooked up. i got an M1MC 077A BW. i will add attachment for wiring but i got gray wire that according to the diagram is supposed to go to 24v to the tstat. this diagram shows 4 stat...
  4. pool_shark_dc

    pump on return ??

    thx for the help. it's a r8182d controller. i want the circulator to only come on with the thermostat so the manual says to connect the diff and the low limit together... now where would i be getting juice for the circulator then... ???? from the transformer?? where do i connect hot leads to ...
  5. pool_shark_dc

    pump on return ??

    cant find any info on the boiler but it's an Egor Duplomat. the controller is a Tradeline R8282D
  6. pool_shark_dc

    pump on return ??

    thought i might have had it all figured out because i looked at the manual for the controller and it said to connect 2 wires together then the circulating pump would only kick on with the t-stat... which is what i want... but when i went over there tonight i found out that if the circulating...
  7. pool_shark_dc

    pump on return ??

    got a buddy with an outdoor stove using it to heat his hot water and his baseboard heating. he's actually got an old Egor boiler. it's a waterheater and a furnace all in one. my question is on the flow side of the baseboard heating there is no pump pushing the water to/through the zone valves...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks