Search results

  1. chickenbrown

    Fantini shower thermostatic mixing valve with 3 vol controls no cold water

    I'm truly stumped on this and I hope someone can help. I installed a super high end Italian made ( but sold in USA for 30 years) shower rough yesterday and after three hours of head scratching gave up! The shower rough is a Fantini 19003903AU. Which is a 3/4" thermo mixer with 3 vol controls...
  2. chickenbrown

    bang!!

    I bought and old house that was renovated badly a few times over the years. Seems like a carpenter did all the plumbing and electric himself. I have a shower that has a fairly new "newport brass" shower mixing valve with a pull out diverter. The shower flows to a 12" rain head when the mixing...
  3. chickenbrown

    bathroom cast iron radiator

    I am looking to add a small cast iron wall radiator in my 10 foot by 5 foot bathroom because my wife says its cold after coming out of the shower in winter. I was thinking to just add it into the closest zone off my hot water boiler but since the t-stat is in the bedroom i think it would be too...
  4. chickenbrown

    steam radiator valve for hot water heat

    My house was converted to hot water heat from steam. All of it was re-piped in 3/4" copper including two original cast iron radiators in the foyer. These two are connected properly in the loop but they used a steam angle valve on both the supply and return. Probably to enable removal of the...
  5. chickenbrown

    mixing existing copper tubing with new pex tubing

    I am in the process of re-piping the hot water heating system in my house. Currently it is all 3/4" "M" tubing. I am re-piping it because the plumber before did not run the zones in proper loops and also ran loops that went up and down three stories to avoid opening up walls. So now after...
Top
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks