Search results

I have an older shallow well pump that i winterize every year. Part of the area where the drain plug screws in has rusted off so I attempted to install a needle valve so i wouldn't have to remove it every year. But while screwing in the needle valve it started going sideways so maybe the threads...

I have an Autotrol 255 system and it was working well until I changed out the resin lately and since then I am having trouble drawing brine. At the beginning of the brine draw the water in the air check valve goes down and the valve closes. I can get it to work if I go to the refill stage for a...

I have a boiler that is horizontally vented with 3" FastNSeal vent pipes and one of the joints is leaking water. I took the pipes apart at the joint and I noticed the gasket was disintegrating. Can I replace just the gaskets? I looked on the Duravent site for FastNSeal replacement gaskets but I...

My house was built about 8 years ago on a shared well and the plumbers put in a Autotrol 268/440i (had to put in a logix 700 controller last year) potassium permanganate iron filter and a 255/400 water softener. The system has worked fine for the most part until about 3 months ago the water was...