Search results

I have a water heater that leaks once a day from around the bottom. It leaks maybe 1/4 of a cup. I can not see where it is coming from. Anyone have an ideas? Charles

Has anyone ever installed an Eljer Gibraltar bathtub and what do they think of it? JIm

I am taking bids to remodel 2 bathrooms and the kitchen. Any thing the contractors supply, they double the price. LIke the bathtub cost $300 at a box store and they charge $600 , is this common pratice in other areas of the country? I would think a 30% markup would be normal. Hate to get...

I would like to add a second sink in a bath. The second sink will be between a sink and a 3 inch vertical waste/vent. The waste going from the sink to the 3.0 waste/vent is 2 inch. What kind of "T" would I have to use. Thanks Chuck

Have any of you used the fernco non-wax unit for setting a new toilet. If this works it looks like it could be used when the flange is lower than it should be after tiling. Thanks Chuck

The waste pipe is 3.0 inch and I believe the flange fits over the 3.0 inch. The waste pipe is located between 2 , 2x10 joist with about 1/2 clearance. Does not seem to be room to cut the pipe to remove the flange from below the floor. . Can this be cut from above and from inside the pipe. Chuck

I had a new Heil furnace installed a couple of months ago and during start up the installer said that there would be some smoke for a couple of minutes. Well there was some smoke and a burnt smell. Since then every time the furnace kicks on there is still a very slight burnt odor .I called the...

I have a master bath with a 78 inch long vanity and just one sink located at the right end of the vanity. The 2.0 waste line runs to the left inside the wall to a 4.0 dia pvc pipe about 85 inches away that goes to the basment to the septic and runs straight up thru the roof as a vent. I believe...