Search results

  1. 1

    Cycle Stop Valve

    I have a sub pump with a Square-D Switch and a Bladder Tank hooked up to a shallow well and I'm using for irrigation only. Everything is working just fine except the Sprinkler heads are having a hard time shutting down. I was assuming it was because of the difference in pressure. My switch is...
  2. 1

    Pump Check Valve

    1hp , Sub pump, 40' well with Bladder Tank , Square "D" Switch with a Pumptec. I posted a Filter Placement problem the other day and cured that situation and after everything was up and running fine for about an hour I started to loose pressure in the system causing the pump to cycle every 2...
  3. 1

    Filter Placement

    1hp Sub pump 230v (15GPM) with an 82 gallon Bladder tank Square "D" Switch and a small inline filter. This is a shallow well. The pump is down 30ft with static at 7 so it is in about 23 foot of water.I have setup the tank 2lbs below the cutin pressure 40 and cutout is 60. The problem is the...
Top
✖
Hey, wait a minute.

This is awkward, but...

It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.

If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.
I've Disabled AdBlock    No Thanks