Search results

i found the issue. there was some blockage in the water supply line at the T going to sprinkler supply. thanks for reading my post.

yes i checked the water before the piping. there's only one valve before the solenoids, it's a manual ball valve. that ball valve supplies water to both the front yard and backyard sprinklers. the front yard has no issues.

the water level was getting too close to all the wiring, so i decided to raise the solenoid valves as a precaution.

no, all the sprinker heads for each zone. i checked if all the sprinker heads were running at the same time to see if the controller was bad.

recently i had to raise the solenoid valves for my backyard due to drainage issues in the box. after i raised the valve set, i tested the sprinkler system. water was flowing out of the all sprinkler heads, but not enough water pressure to make them pop up. i looked around for spots in the yard...