Search results

I lucked out: Lowes had a donut that worked - it did need quite a bit of "persuasion" to get all together, but I'm back in business. Last step is to fill in the hole in foundation wall - and make a form to keep the concrete from covering up the hub/donut/Sch40 connection.... just in case...

You are right, it is a hub, I used the wrong word. In our area, as far as I konw Schedule 40 pvc can be used underground . If I can't find a correct size donut, you mentioned 'pouring': what could I use to fill the gap instead of the donut? Some epoxy of some kind? Once I'm done, the last...

I just went through a similar ordeal: I bought a concrete drill bit, chucked it in my 3/8 variable speed drill, and drilled a bunch of pilot holes. I then used a garden variety chisel to break the concrete. It took a while to do all this, but it worked fine for my purposes.

I'm new to the forum, if there's another thread that answers this, just point me to it: The cast iron elbow connecting the waste line inside my house to the cast iron pipe that goes to the septic tank failed. The flanged end of the septic line rests about 2 inches inside the block wall : I...