Search results

link? Got a link? I've not been having much luck looking on line for a packaged set up, just lots of pumps.

I've added some plumbing (washer and 1/2 bath) to the middle level of a 3 level split. Everything runs into 3" abs across to the lower level (basement). It enters the lower level 4ft off the floor. I'm thinking of running it down into a small lift station on the floor, up to the ceiling and...

Great. Thanks.

I have an electric HWT with a lower and upper element and a thermostat for each element. What is the proper way to set the two 'stats? the same? one higher that the other?

Now I need a filter. ?source That tutorial site is great. Tons of info. The guy suggests using a filter (150-100 micron) for the supply water to avoid problems with stuff/sand getting into the valves or heads. I'm not having any luck finding something that won't restrict my flow, preferably...

Gary, YOU THE MAN! Great site. Now i'm cookin with the planning of my system. Thanks.

I've got 55 sprinklers to hook up and I've got a 10 zone controller. A local contractor measured my out put on a 3/4 outside line and figured I can run 5 sprinklers per zone for sure. I plan on running a line on the surface with 6 sprinklers just to see what kind of distance I can get and...

Vaccum breaker??

I figured pulling off from the 1 1/4 pipe would supply more water to the sprinklers than if I go house side where it's down to 3/4". Or will it make much difference?

I have a submersible with 1 1/4" poly pipe coming from it to the pressure tank in the basement. I'm planning to put an underground sprinkler system in. Today I teed into the 1 1/4" line, just before the pressure tank and ran the line outside with a valve and a proper backflow valve. I wanted to...

Because my yard is large and the water source is off in one corner, I'm running 1 1/4" poly main feed accross the middle of the yard. The valves will come off this main feed in pairs or triples and it will be 1" poly feeding off the valves to each zone. Has anyone ever assembled their own valve...