Search results

We just had our 1969 house re-plumbed with all pex lines and a new softener installed. (Added a bed/bath.) We are on a well. Line from well to house is 1” then reduced to 3/4. We also had a manifold installed. Never had any issues before. Now if we have 45 psi at the manifold and turn a faucet...

According to this lab report what filtration should be used for this well from start to finish? There’s 2 adults and a teenager in the house. One bathroom. We’ll is 140’ deep and water comes out of the vent when the well is not being used.

This is the report I have for my well in the mountains of western North Carolina. This well is only 140’ deep and water comes out of the vent when we’re not using any water, so it’s a spring. What filtering system do y’all recommend for it? I have a pro aqua we’ll series 1E but it’s not cutting...

There are two wells on the property we bought in the mountains of North Carolina. The well serving the house is 140' is and has water coming out the vent when the well isn't being used, it also has a lot of iron, 1.680 ppm as fe is what the report says, it also say the ph is 6.39. For this well...

My well pump sits at 140’ deep. Not sure the actual depth of the well, but it is an artesian well, I live half way up the mountain. I replaced the pump, pressure tank and switch and added an automatic backwash filter. The new pump is a zoeller 1/2hp, 12gpm, 2 wire, 230v. I have an 86 gallon...