We have a Culligan Super S that was installed when we bought the home. We had replaced the tank but it is time for that again. In addition, the backflush /purex part of the system is NOT working right. It pulls the entire bottle in one regen, and leaves the whole system smelling horrid.
We are two in the household, two baths, dishwasher. Private well, pressure tank.
We'd like to get away from the Culligan system (proprietary) but we can self maintain/ install. Any recommendations based on the info I have below.
Well record shows GPM 11
Well does silt in and we have to have it bailed every 3rd yr. Our micron filter helps to eliminate that.
PH: 7
FREE CHLORINE: .1
SATURATION INDEX: LOW
TOTAL ALKALINITY: 37
TOTAL CHLORINE: .1
TOTAL HARDNESS: 26
CYA: 2
SALT: NA
TDS: NOT TESTED
We are two in the household, two baths, dishwasher. Private well, pressure tank.
We'd like to get away from the Culligan system (proprietary) but we can self maintain/ install. Any recommendations based on the info I have below.
Well record shows GPM 11
Well does silt in and we have to have it bailed every 3rd yr. Our micron filter helps to eliminate that.
PH: 7
FREE CHLORINE: .1
SATURATION INDEX: LOW
TOTAL ALKALINITY: 37
TOTAL CHLORINE: .1
TOTAL HARDNESS: 26
CYA: 2
SALT: NA
TDS: NOT TESTED