antbruins
New Member
I'm still having problem with this stupid thing. The water is still hard and the amount of salt inside the tank appears to be at the same level. I hear the system regenerating every so often, but for some reason or another, I don't think it's using the salt.
I manually regenerated just now and measured the water level before, during, and after. It appears to go from approximately 7" in a 18"-diameter tank, down to 2" after brine draw, and back up to 7" after brine fill. I normally hear the salt crumbling when I've poured water from the top, but haven't heard it during brine fill. There's a grid at the bottom of the tank and I was wondering if 7" is enough to clear the grid and reach the salt.
I'm going to test the water again tomorrow morning and see if the water is back to being soft.
I manually regenerated just now and measured the water level before, during, and after. It appears to go from approximately 7" in a 18"-diameter tank, down to 2" after brine draw, and back up to 7" after brine fill. I normally hear the salt crumbling when I've poured water from the top, but haven't heard it during brine fill. There's a grid at the bottom of the tank and I was wondering if 7" is enough to clear the grid and reach the salt.
I'm going to test the water again tomorrow morning and see if the water is back to being soft.