adayrider
New Member
Title says it all. My new 7000 sxt bypass is 1" male and my plumbing is 3/4 pex, so what fitting would work best with as little restriction and such.
If you are in a hurry, you could drain. If you drain, it would be a good time to flush your WH at the same time.If it does work on hot water, should I drain my hot tanks or just let them purge themselves?
I don't know how the Hach works on hot water. I suspect fine, but I don't know. If you put the hot water into the bottle, it will not be hot water in 20 minutes.I can't say I'm in that big of a hurry. I take it from your response that the hatch works on hot water. I think I will test again the morning and see if I make any progress .
How do you recommend flushing?
If you already have the 1 inch NPT connector, another alternative would be to use two SharkBite SS3086FLEX24LF (corrugated)or Sharkbite U3086FLEX24LF (braided) 1 inch FIP to 3/4 Sharkbite .My new 7000 sxt bypass is 1" male and my plumbing is 3/4 pex, so what fitting would work best with as little restriction and such.
This is awkward, but...
It looks like you're using an ad blocker. We get it, but (1) terrylove.com can't live without ads, and (2) ad blockers can cause issues with videos and comments. If you'd like to support the site, please allow ads.
If any particular ad is your REASON for blocking ads, please let us know. We might be able to do something about it. Thanks.