Philwgreen
Member
I'm in the process of renovating my laundry room and I'd like to add a sink. The problem is, I'm not sure how to add the sink in conjunction with the washer stand pipe. The standpipe will remain basically where it is now and the sink will be to the right.
My first thought was to put a tee above the washer tee and run my drain and vent pipes more or less like the attached picture (electrical is being relocated). I will also be building a partition wall and ideally I could get everything 'inside' that wall.
Before I started, I thought I'd ask here to see if there is a simple, obvious way that I'm just not seeing.
Thanks in advance.
My first thought was to put a tee above the washer tee and run my drain and vent pipes more or less like the attached picture (electrical is being relocated). I will also be building a partition wall and ideally I could get everything 'inside' that wall.
Before I started, I thought I'd ask here to see if there is a simple, obvious way that I'm just not seeing.
Thanks in advance.