Hugh Daiger
New Member
Hello everyone,
I’m new to the forum and I have a water softener question. I just purchased a house and it came with a Ecowater System 2100-PF10. It doesn’t look like it’s been maintain for a long time and it’s also set to bypass. I would like to clean it out and get it up and running again, not sure what media to use since the water is very hard in this area. I’ll list the water test numbers, not sure what you need this might be too much information.
Thanks
Hugh
Parameter Method Results Units
Total Hardness EPA 130.2 2,520 mg/10CaC0 3
pH EPA 150.1 6.76 su@23.8 C
TDS EPA 160.1 4,649 mg/1
Iron EPA SM18 3111B 0.115 mg/1
Manganese EPA SM18 3111B 0.483 mg/1
Nitrate EPA 300.0 0.67 mg/1
Total Coliform SM18 9222B <1.0 #/100ml
C02 SM18 4500-C02-B 150 mg/1
I’m new to the forum and I have a water softener question. I just purchased a house and it came with a Ecowater System 2100-PF10. It doesn’t look like it’s been maintain for a long time and it’s also set to bypass. I would like to clean it out and get it up and running again, not sure what media to use since the water is very hard in this area. I’ll list the water test numbers, not sure what you need this might be too much information.
Thanks
Hugh
Parameter Method Results Units
Total Hardness EPA 130.2 2,520 mg/10CaC0 3
pH EPA 150.1 6.76 su@23.8 C
TDS EPA 160.1 4,649 mg/1
Iron EPA SM18 3111B 0.115 mg/1
Manganese EPA SM18 3111B 0.483 mg/1
Nitrate EPA 300.0 0.67 mg/1
Total Coliform SM18 9222B <1.0 #/100ml
C02 SM18 4500-C02-B 150 mg/1