Jadziedzic
Active Member
Can anyone offer any suggestions on how to repair a joint in a PVC vent that has a very slight leak (a few small drops in an hour) after a heavy rain? There is limited space to work in (see pictures below) - the leaking joint is at the rear of the tee. The vent line marked "FV" is 2 inch pipe; for reference, the section between the hubs of the two elbows is just a hair less than 2 inches long, while the section between the tee and the rear elbow is about a half inch.
I'm willing to give this a go myself if it a moderately handy DIYer can tackle it, or I'm happy to call in a professional. Suggestions would be appreciated - thanks!
I'm willing to give this a go myself if it a moderately handy DIYer can tackle it, or I'm happy to call in a professional. Suggestions would be appreciated - thanks!