Recent content by worsnup

i would check the water pressure

i love the toilet the brass fitting is wall hung tank connection the one to the left is a vent you can put it on a CI 4'' footed p-trap you wont be to happy with the cleaning end of it though i love old toilets oh yea its not a toilet its a bed pan washer

i wonder how much the CEO of pg&e took home last year? what was that fat bonus for all the cost cutting implementations he approved to to satisfy some fat corporate parasites!

a scale drawing is needed as well as fixture count and location

your not a plumber until you get a little in your mouth.... oh ya.... simple green

its a two part handle the ''4 point metal star'' is part of the handle and is corroded to the stem pull wiggle pull wiggle pull puulll

i love cinch clamps

the refill tube? the refill tube refills the bowl to a proper level after each flush. if it is not working--- you flush the toilet and it flushes but leaves bowl level is low-- so when you flush again, half your water is used to fill the bowl resulting in a miss fire... flush once more and it...

you have plastic or pex water system, its algae and its common in plastic systems in phoenix

in phoenix we live with it

its called a hub bushing goes in the clay hub (female end) its just a gasket you should look for one that is clay x pvc

stay way from the rubber coller flange they suck there are holes in your repair flange to bolt it to the floor just neeed a drill 1/4" masonary bit and i like mushroom head lead ancors ployseamseal dreis harder and sticks the best

a few more pics could help i would flip the street 90s and go with a hub flange if the back wall is at the top of the pic then maybe a 45 with a 45 flange hard to say

suds you should run two 2" lines back to the 4'' to prevent suds in the sink

check for gfci outlets