Recent content by weigelbrood

Prv leaking I installed a used water heater to save the nearly $800 or more of buying a new water heater and having it installed by a pro, and getting the satisfaction of doing something by myself. At the same time, I replaced all the copper in my house with pex, and added a whole house...

Prv leaking I'll replace the valve. Pressure is about 30psi. Thanks, Redwood.

I just installed a used 40gal propane water heater, flushed and filled. Now the prv is leaking. About 1 gal/2hrs or thereabouts. It leaks whether the water in the tank is cold or hot. I tested the valve and it does work, but seems to not close all the way. Is there a way to remove it and...

Hey all, I moved into an old farm house last year and have had nearly constant problems with the current well/pump setup. the well, pump, and pressure tank are all situated in an old cistern under my patio. It is accessible with a 7' ladder through an access door. There is often a 1' of...

Special Valve I have a Taco 007 for the circulator. Any specific suggestions on aquastat and relay? They all seems a bit pricey for what I was planning. My system will not be large and id like to keep it simple. I can purchase wholesale from RE michel if that helps to narrow it down...

Does anyone know of a mechanical/thermostat type valve that will open automatically when the temperature of the water in the pipe reaches a temperature like 120 deg, then opening to allow that water to circulate through a radiant floor zone before returning for reheating? I guess I'm thinking...