Recent content by Vans

Thanks for all your replies I did order the Camco socket, should help as the 3/4 drive socket is 4" long,

I'm looking for a good socket, I'be been using a 1-1/2" 3/4 drive to change elements, this is a 6 point socket and is 4" long which makes it easy to slip of element, just rounded one off today that appears to be welded in place:) Any recommendations? Thanks

;), the dam thing needs constant source of power, who would have thought of that I get the dumb ass award, at first I was offended by "check for switched outlet", guess I never knew top half of outlet was switched Thanks for helping I need to give a big SHOUT OUT! to Bryan at 602abc WATER for...

First of all -thanks guys for the help/advice ditttohead said: ↑ If you close the inlet side of the bypass, you will know exactly what the unit feeds. Check to make sure it is feeding everything in the house that you want it to. Done, I have dedicated untreated line to ice maker/kitchen...

I installed, I don't think it's that technical of a job, I'm a licensed carpenter and have done my share of plumbing. I use a Hach 5b Hardness test kit, (best 20.00 I've spent in a while), to test water and yes I have the house softener plumbed how I want Hardness was starting to climb so last...

Pretty sure I'm set at po.7, that's something I checked when I started trying to figure this out I'll double check just in case

Pic of meter

My first go around with this unit was a missing paddle wheel in meter, I should have bought local as we have a local brand, Peerless, I've installed a few of them and never had issue But they are a couple hundred more

I have plastic bypass on, had a stainless valve on it and had all sorts of problems, metering was worse, it wouldn't even go through regeneration properly, vendor sent new valve and after install had same issue, I decided to pull stainless valve and install plastic which helped, plugged in old...

Fleck 5600 SXT, and yes it's a low flow, also have a 1.6 Toto sitting next to shower and I think that doesn't meter either, but the vanity does meter, as I've checked numerous times. The shower does meter at times, I turn on and watch valve and it will work, a gallon or two then quits. Washer...

Installed last December, my unit doesn't meter all water usage, it appears that just bathtub on my main floor, took shower this morning and check gallons before and after and no change, but go to kitchen sink and run water it counts down. I've checked the connection to meter and checked impeller...

Thank You After posting my problem I did a search and found the same answer you provided, wish I would have caught that during install

I am a Maintenace Manager for a Foundation, we have over 30 buidings I have 8 of these CST464MF Aquia Dual Flush ADA in a new LEED Certified Building No Problems so far, Toto toilets Rock, I bet I have 20 of the Drakes and never have any issues Today I ran acrost a problem that I hope...

Duct Tape?

Let me now if that's something you want to part with, I may be interested. Thanks Jon