Recent content by ta240

I'm wondering if I'm over reacting at the condition of the mortar. If I jab at it with a screwdriver it will chip away but jumping up and down in the tub at the area the feet are doesn't have any effect on it. I'm up against a time limit though as they are coming out tomorrow to close in the...

Am I being too impatient on it setting up? It has been about 15 hours and if I poke at it with a screwdriver chunks will break away and then crumble. I'm afraid once they close up the front of the tub panel tomorrow it will then just crack out from under the tub over time and we won't have...

We are installing a drop in tub and I'm trying to find the best product for under it. There is about 3/4" between the feet on the tub and the platform that is there. I tried the top one and I may have mixed it too wet as it is just crumbling now thanks in advance! Trevor

I was working in our one bathroom, which is very much torn apart, and can see through the wall to our other bathroom shower/tub and there isn't anything under the assembly other than the couple little feet supporting it. Since we are using that shower/tub now I've really noticed it flexing...

thanks! I'm at the point now where we will be doing the tub in a couple days. The height of the deck is changing some so I won't know the exact height to set the base for under the tub at so the mortar will be a must. I've seen some places claim that once you set the tub in the mortar you are...

Hi, We are getting ready to redo some of our bathroom and it requires removing and reinstalling a drop in tub that is set inside a raised tiled area. I broke out the small access point on the front that was the last spot they tiled when they built the house and looking inside I see that the...