Recent content by steve-lion

Thanks for the excellent advice. My incoming pressure is from a well tank set at 40/60 PSI so I presume 40 PSI would be close to the minimum on the input line on the softener which is only 12' of 3/4" copper away from the well tank. If I tried to use the existing line, any suggestions as to...

Hello all - I'm replacing a 19 year old Ecowater water softener. The softener is in my basement and drains using 1/2" ID PVC that runs overhead about 45 feet before tapping into the main drain line at the point it exists the house to the septic system. Most every replacement water softener...