Recent content by keithwwalker

From what I read, a ASSE 1070 mixing valve provides scald protection, but not thermal shock protection, and is approved for point of use bath installations. ASSE 1016 provides both, and is required by code for bath/shower installations (one control shower). Are there any 1016 devices that...

Wondering what the dimensions are on Kohler stem splines? (diameter) I already have Delta handles for my shower project (three handle retrofit). The diameter of the Delta valve inserts are 9mm and 7.75mm measured on the flat (where the set screw fastens). I believe I can use a stem adapter...

All I wish to do is change the handles. The parts are still obtainable, and the replacement valve seals and cartridges are already installed. There is also an existing tempering valve by the water heater. fwiw, I have found some answers: The H24 handles are generally for sinks, and the H64 are...

Yes it is a hot/cold/diverter setup. The goal is to replace the valve cartridges, and levers; but not the rough in (it is in good condition). I don't believe that a permit is called out for cartridge replacement.

Hi I have a real old Delta 3 handle bath/shower valve system. The job started out just with replacement of the shower walls and since I was in there, it made sense to replace the valve cartridges and spring/seals so that it would be good for a long time. Then I decided that if I could replace...