Recent content by justcallmeglen

I think I'll stick with putting the ditra under it, adding the tile feels too tight. Thanks!

So I unscrewed the flange from the subfloor and it looks like there is enough play in the pipe that I can fit the ditra and tile under it. Tough question to answer but how much can I raise it before I put too much stress on the other end? It raises up pretty easily.

Kitchen ceiling below. Rather not mess with popcorn.

Second toilet I've tackled and the first was easy. From this pic it looks the closet flange (cf) was cut too much and a PVC ring was glued to the cf and 90 deg fitting. Last toilet I cut the cf away with the Reem cleanout tool so I could glue a piece of abs pipe to the fitting and the cf to...

One more shot...will this work?

ah crap! any way you see #1 going to 2"

Hello, looking to convert my fiberglass tub/shower surround unit with just a tiled shower. Looking for the best way to accommodate the required 2" drain. Already had one Master Plumber say reduce the drain before the P-Trap to 1 1/2". There has to be a better way. In pic #1 I'm 99% sure...

Kalex, enable your ramp delays. You can set them to hold firing rate as little as 20% for as much time as 20 min. You have 6 blocks you can fine tune. I have mine set for 25% for the first 20 min, keeps me from shooting past the set point temp, especially in shoulder season temps. But be...