Recent content by Jgrant0553

Think I'm only going to have a tank at the bottom since that is all I really need. Hope to get this set up in the next couple of weeks and will let you know how it goes. Thanks again. Saved my butt on this one.

Great thank you. This is great advice. I have not been able to find anyone who could give ms a straight answer about all of this. I looked at the csv website and it looks like I should use valve CSV1A, is this the best valve to use in this application?

Ok now I'm confused. First what is csv? So you are saying I need a tank down by the pump that the pump will pressurize, correct? When I ran a smaller jet pump (utilitech) at this same location it put out 60 psi, that's what the gauge read and I had about 25psi at the house. So does this mean...

Should I go with the biggest pressure tank I can fit in the basement?

Great that's what I needed to know. Thank you b

Ok have a pumping problem. I have built a house up on a hill about 250 vertical feet above my city water main. The city pressure gets water about half way up (150 vertical feet) and leaves me with about 30 psi. At this point I have a two stage jet pump which will add another 90 psi giving me...